Snake plant
Dracaena trifasciata (formerly Sansevieria trifasciata) · Asparagus family (Asparagaceae)
When to plant: Any time of year, since it grows indoors. It likes a snug pot: repot only about every 5 years (every 3 for the dwarf kinds).
| Hardiness zones | 10 to 12 |
|---|---|
| Sun | part shade |
| Water | low |
| Life cycle | perennial |
| Frost | Tender: killed by frost |
Will it grow in your window?
Pick the window it sits in. This is the same check Sow & Tell runs for every plant in your house.
It wants bright, indirect light.
Pick a window above and this will tell you whether the spot suits it.
Watering: let it dry out between waterings — about every 10 days, stretching to every 18 from November to February.
Summering outside? Bring it in before nights drop below 50°F.
About Snake plant
The snake plant, or mother-in-law's tongue, is a stiff, upright succulent from West and Central Africa with sword-shaped leaves banded in gray-green and often edged in yellow (NC State). It was long called Sansevieria until genetic work moved it into Dracaena (Penn State). It shrugs off low light, dry air and weeks without water, which makes it about the hardest houseplant to kill; the one thing that does it in is wet soil. Its tough leaf fibers were once grown in Florida for rope and bowstrings.
Hardy outdoors only in zones 10-12 (NC State); it is grown indoors everywhere and can summer outdoors in shade once nights stay above about 50 F.
When to plant
Any time of year, since it grows indoors. It likes a snug pot: repot only about every 5 years (every 3 for the dwarf kinds).
Usually bought as a nursery plant or started from a division of an older clump; leaf cuttings also root (Penn State).
Growing it indoors
- Light: Tolerates very low light and heavy shade, though it grows faster in medium to bright light; keep it out of hot direct sun, which can burn the leaves (NC State, Penn State).
- Water: Water only when the mix is dry all the way through, then drain the saucer; it can go a month without water, and overwatering is the one thing that kills it (Penn State). Spring through fall let it dry between waterings; in winter NC State says water only every one to two months.
- Humidity: Tolerates the driest indoor air (NC State).
- Temperature: Tolerates cool rooms down to about 50 F (NC State); MU Extension suggests 65 F nights for best growth, and it must never freeze.
- Feeding: An all-purpose houseplant fertilizer at half strength once a month during the growing season, none in winter (Penn State).
- Repotting: Only about every 5 years with fresh potting mix, or every 3 years for the dwarf 'Hahnii' types; it likes a snug pot, but a badly rootbound plant can crack a clay pot, and tall kinds need a heavy pot so the leaves don't tip it over (Penn State).
- More plants: Division is easiest: after a few years the plant makes offsets, so knock it out of the pot, cut the clump apart and repot (Penn State, NC State). Leaf cuttings also root, though yellow-edged kinds come back plain green from leaf cuttings.
If something looks wrong
| What you see | Likely cause | What to do |
|---|---|---|
| Leaves soft and yellow at the base, mix soggy, a sour smell | Root rot from overwatering | Stop watering, let the mix dry fully, and repot healthy divisions into fresh cactus mix (Penn State, NC State). |
| Pale, scorched patches on the leaves | Too much direct sun | Move it back from the window into bright indirect light (Penn State). |
| Plant tipping out of its pot | A light, dry pot and heavy top growth | Move it into a heavier pot and divide an overcrowded clump (Penn State). |
| Cottony tufts in the leaf bases or fine stippling | Mealybugs or spider mites | Wipe the leaves with a damp cloth and dab pests with rubbing alcohol; few other pests bother it (Penn State). |
Soil
A fast-draining cactus mix or potting mix cut with perlite, in a pot with drainage holes; it tolerates neutral to alkaline soil (Penn State, NC State).
Pot in a fast-draining cactus mix, or a potting mix with extra perlite, in a heavy pot with drainage holes (Penn State).
Feeding
- Spring through early fall (growing season): all-purpose houseplant fertilizer at half strength. Once a month, watered in on a day the plant is due for water (Penn State).
- Winter: none. No fertilizer while growth has stopped; water only every month or two (NC State).
Overwatering kills more snake plants than anything else; feeding a wet, dark plant only makes rot more likely (Penn State, MU Extension).
Varieties (15)
| Variety | Type | Zones | Notes |
|---|---|---|---|
| Black Jack | Compact | 10+typical for snake plant | Compact plant with dark green leaves and yellow-green margins. Sources: [1] |
| Whitney | Compact | 10+typical for snake plant | Dark green leaves with pale and dark green variegation along the margins. Sources: [1] |
| Fernwood Mikado (D. bacularis) | Cylindrical-leaved relative | 10+typical for snake plant | Narrow upright cylindrical leaves that fill in densely with age. Sources: [2] |
| Starfish (D. angolensis 'Boncel') | Cylindrical-leaved relative | 10+typical for snake plant | A related species with round, pointed leaves that fan out flat like a starfish. Sources: [2] |
| Golden Hahnii | Dwarf rosette | 10+typical for snake plant | Dwarf rosette with golden leaf margins, up to 7 in. Sources: [2] |
| Hahnii (bird's nest) | Dwarf rosette | 10+typical for snake plant | A low funnel-shaped rosette of 6-12 short leaves banded in creamy white, about 6 in tall. Repot about every 3 years (Penn State). Sources: [1][2] |
| Black Robusta | Tall, dark | 10+typical for snake plant | Dark green leaves mottled with silver stripes. Sources: [1] |
| Futura Robusta | Tall, silver | 10+typical for snake plant | Dark green leaves with silvery-green blotches. Sources: [1] |
| Moonshine (Moonglow) | Tall, silver | 10+typical for snake plant | Broad silvery-gray-green leaves with a narrow dark green margin. Sources: [1][2] |
| Silver Queen | Tall, silver | 10+typical for snake plant | Silver-green leaves with light green horizontal bands. Sources: [1] |
| Twisted Sister | Tall, variegated | 10+typical for snake plant | Twisting leaves with yellow-gold and green variegation. Sources: [1] |
| Bantel's Sensation | Tall, white-striped | 10+typical for snake plant | Narrow dark green leaves 1-2 in wide with white vertical stripes, up to 36 in tall. Sources: [1][2] |
| Black Gold | Tall, yellow-edged | 10+typical for snake plant | Very dark green leaves with a bright gold edge. Sources: [1] |
| Futura Superba | Tall, yellow-edged | 10+typical for snake plant | Shorter, broader gray-green leaves with a yellow margin. Sources: [1] |
| Laurentii | Tall, yellow-edged | 10+typical for snake plant | The classic snake plant: dark green leaves with lighter zigzag bands and golden-yellow margins. Leaf cuttings lose the yellow edge; divide it to keep the pattern. Sources: [1][2] |
Pests to watch for
Diseases and problems
In the kitchen
Safety: All parts contain saponins; eating it can cause nausea, vomiting and diarrhea, and the sap may irritate skin (NC State rates it low severity). The leaf tips are sharp enough to poke an eye, so set tall plants away from walkways.
Pets: Toxic to dogs and cats (ASPCA): saponins cause nausea, vomiting and diarrhea. NC State also lists it as a problem for horses.
Sources
Photo: Photo: 四角銅鑼, CC BY 4.0, via Wikimedia Commons (CC BY 4.0). Photo resized for the web.
Planting dates and advice are general guidance; check with your local Cooperative Extension office for your area.